Custom technical ceramics for industrial equipment, demanding operating environments, and drawing-based projects.
Share your drawing, sketch, or 3D model. We review geometry, tolerance, and function with you.
We discuss candidate materials based on your operating conditions — not a generic catalog guess.
Where appropriate, we support first-article and low-volume parts to validate fit and function.
For approved parts, we support repeat orders with consistent configuration control.
Alumina nozzles are the economical choice for general spray and dispensing duty, including corrosive fluids at moderate velocity. Orifice held to ±0.005 mm.
View component →Alumina plates are the general-purpose choice for wear liners, insulating barriers and hot platens. Flatness held to 0.005 mm per 100 mm.
View component →Alumina plungers are the standard for high-pressure water jetting and general dosing pumps. Cylindricity held to 0.005 mm, finish to Ra 0.2 µm.
View component →Alumina rings are the default for mechanical seal faces in clean water and general chemical service. Seal faces lapped to 0.005 mm flatness.
View component →Alumina rods are the general-purpose choice for insulating and locating duty. Diameter held to ±0.002 mm, straightness to 0.02 mm per 100 mm.
View component →Alumina sleeves are the standard wear bush for pumps handling water, chemicals and mild slurries. Bore cylindricity held to 0.005 mm, clearance matched to your shaft.
View component →Alumina substrates are the default carrier for thick film and general power circuits. Thickness held to ±0.02 mm, camber under 0.1%.
View component →Alumina tubes are the standard for thermocouple protection and furnace insulation to 1500 C. Wall thickness to 0.5 mm, concentricity held to 0.02 mm.
View component →Alumina (Al2O3) is the most widely used technical ceramic, offering an excellent balance of hardness, wear resistance, electrical…
Explore material →Aluminum nitride (AlN) is valued for its high thermal conductivity together with excellent electrical insulation, a key substrate…
Explore material →Boron carbide (B4C) is one of the hardest man-made materials, with exceptional abrasion resistance and low density for…
Explore material →Boron nitride (BN, especially hot-pressed hexagonal BN) is a soft, machinable ceramic with superb thermal shock resistance and…
Explore material →High-performance ceramics for aerospace and advanced engineering, combining light weight, stiffness and survival in…
Explore application → APP 05Ceramic wear parts for conveying, dosing and bulk-material handling, valued for hardness, low friction…
Explore application →Send your drawing, sketch, or a description of the operating condition.
We review geometry, tolerance, and functional intent with you.
We discuss material and process options for your conditions.
You receive a clear quotation with stated assumptions.
Prototype or repeat production is coordinated on confirmation.
We start from your application, not a generic product catalog.
In placeCapabilities are published only after verification.
In placeCustomer drawings are handled under controlled access.
In progressTechnical discussion before commitment, not auto-promises.
In placeA practical comparison of two common oxide ceramics for sealing components.
ResourceWhat to include in your drawing so we can respond faster and more accurately.
ResourceHow ceramic rings behave in pump sealing and what to verify first.
ResourceA guide to achievable tolerances and how to specify them.
Share your drawing or application requirements to start a technical discussion.
