Low-friction, contamination-free ceramic sleeves and bushings for bearing and guide surfaces.
Silicon carbide sleeves are used in the hardest pump duties, including hot fluids and slurries carrying hard particles. Bore cylindricity held to 0.005 mm, clearance matched to your shaft.
View component →Silicon nitride sleeves suit bearings and bushes that see shock loading and marginal lubrication. Bore cylindricity held to 0.005 mm, clearance matched to your shaft.
View component →Alumina sleeves are the standard wear bush for pumps handling water, chemicals and mild slurries. Bore cylindricity held to 0.005 mm, clearance matched to your shaft.
View component →Zirconia sleeves are used where a shaft deflects or runs misaligned, because the material tolerates the edge loading that would chip a brittle bore. Bore cylindricity held to 0.005 mm, clearance matched to your shaft.
View component →
