Custom technical ceramics for industrial equipment, demanding operating environments, and drawing-based projects.
Share your drawing, sketch, or 3D model. We review geometry, tolerance, and function with you.
We discuss candidate materials based on your operating conditions — not a generic catalog guess.
Where appropriate, we support first-article and low-volume parts to validate fit and function.
For approved parts, we support repeat orders with consistent configuration control.
Alumina rods are the general-purpose choice for insulating and locating duty. Diameter held to ±0.002 mm, straightness to 0.02 mm per 100 mm.
View component →Alumina substrates are the default carrier for thick film and general power circuits. Thickness held to ±0.02 mm, camber under 0.1%.
View component →Aluminium nitride tubes are used where a tube has to pass heat while blocking electricity, in heater element carriers and semiconductor tool gas paths. Wall thickness to 0.5 mm, concentricity held to 0.02 mm.
View component →Custom fused silica parts are made for UV optics, viewports and components exposed to extreme thermal cycling. Tolerance held to ±0.002 mm on ground features.
View component →Fused silica plates are used for UV transmission, viewports and low-expansion reference surfaces. Flatness held to 0.005 mm per 100 mm.
View component →Thanh gốm alumina là lựa chọn đa dụng cho nhiệm vụ cách điện và định vị. Đường kính giữ đến ±0,002 mm, độ thẳng đến 0,02 mm trên 100 mm.
View component →Thanh gốm boron nitride phục vụ như phần tử giải phóng và cách điện hơn là chi tiết chịu tải. Đường kính giữ đến ±0,002 mm, độ thẳng đến 0,02 mm trên 100 mm.
View component →Thanh gốm silicon carbide phù hợp cho đồ gá lò và giá đỡ nhiệt độ cao, nơi độ dẫn 120-200 W/m·K tỏa nhiệt đều dọc thân thay vì để điểm nóng ở hai đầu. Đường kính giữ đến ±0,002 mm, độ thẳng đến 0,02 mm trên 100 mm.
View component →Aluminum nitride (AlN) is valued for its high thermal conductivity together with excellent electrical insulation, a key substrate…
Explore material →Send your drawing, sketch, or a description of the operating condition.
We review geometry, tolerance, and functional intent with you.
We discuss material and process options for your conditions.
You receive a clear quotation with stated assumptions.
Prototype or repeat production is coordinated on confirmation.
We start from your application, not a generic product catalog.
In placeCapabilities are published only after verification.
In placeCustomer drawings are handled under controlled access.
In progressTechnical discussion before commitment, not auto-promises.
In placeA practical comparison of two common technical ceramics for sealing and wear parts.
Key dimensions and interface factors that affect ceramic seal performance.
How to frame a corrosion-resistance discussion before committing to a design.
The information suppliers need to give you a realistic quote and timeline.
Share your drawing or application requirements to start a technical discussion.
